产品展示

◆ FC-SE150A塑性加工油适用于钢板、不锈钢板的重度挤压、拉伸、冲压工艺。产品含有较多的氯系极压剂，润滑性良好，较低的粘度，可适用于变形率大的加工。SE150A是SE150的性能提高品。
FC-SE150A plastic processing oil is applicable to severe squeeze and tensile stamping process of steel plate and stainless steel plate. This product contains more chlorine extreme pressure agent, good lubricity, low viscosity, and can be applied to the large deformation rate processing. SE150A is an improved product of SE150.
◆ FC-SE150塑性加工油适用于钢板、不锈钢板的重度挤压、拉深、冲压工艺。产品含有较多的氯系极压剂，润滑性良好，较低的粘度，可适用于变形率大的加工。
FC-SE150 plastic processing oil is applicable to severe squeeze and tensile stamping process of steel plate and stainless steel plate. This product contains more chlorine extreme pressure agent, good lubricity, low viscosity, and can be applied to the large deformation rate processing.
◆ FC-SM150塑性加工油适用于钢板的中度挤压、拉深、冲压工艺。产品具有优良的润滑性，粘度低，适用性很强。
FC-SM150 plastic processing oil is applicable to moderate squeeze and tensile stamping process of steel plate. It has good lubricity, low viscosity and strong applicability.
◆ FC-SD2000D是含有氯系添加剂的塑性加工油，适用于碳素钢和不锈钢冲孔、拉伸加工工艺，SD2000D是SD2000的低粘度品。
FC-SD2000D is plastic processing oil containing chlorine additives, applicable to punching and stretching process of carbon steel and stainless steel, SD2000D is low viscosity product of SD2000.
◆ FC-SD3000塑性加工油适用于碳素钢、不锈钢的重度冲压、拉伸工艺。该产品具有优异的润滑性，适用性很强。
FC-SD3000 plastic processing oil is applicable to heavy stamping and stretching process of carbon steel and stainless steel. This product has good lubricity and strong applicability.
◆ FC-SE200塑性加工油含有磷、硫、氯系极压剂，适用于钢板、不锈钢板尤其是轴承钢材的重度冲压、冲孔工艺。
FC-SE200 plastic processing oil contains phosphorus, sulfur, chlorine extreme pressure agent, suitable for heavy stamping and punching process of steel plate and stainless steel plate, especially bearing steel.
◆ FC-FJ200塑性加工油适用于铜合金的冲压加工，产品具有优良的润滑性和良好的速干性。低粘度、高闪点、低气味，作业性优良。
FC-FJ200 plastic processing oil is applicable to stamping processing of copper alloy, it has good lubricity and good quick-drying. It has low viscosity, high flash point, low odor and excellent workability.
◆ FC-SD1720适用于碳素钢、不锈钢的深绞孔、冲孔等重加工工艺。该产品含有较多的油脂、极压剂及特种润滑剂，无不愉快气味，易被操作工接受。
FC-SD1720 is suitable for deep reaming, punching and other heavy processing of carbon steel and stainless steel. The product contains more grease, extreme pressure agents and specialty lubricants, has not unpleasant odor and easy to be accepted by operators.
◆ FC-SD3000H塑性加工油适用于碳素钢、不锈钢的重度冲压、拉深工艺。该产品具有优良的润滑性，适用性很强。
FC-SD3000H plastic processing oil is applicable to heavy stamping and stretching process of carbon steel and stainless steel. This product has good lubricity and strong applicability.
◆ FC-FJ2H塑性加工油适用于薄钢板、薄不锈钢板、磷青铜板的冲压、冲孔、轻度拉深工艺。产品具有速干性和良好的润滑性等特点。
FC-FJ2H plastic processing oil is suitable for stamping, punching and mild drawing process of thin steel sheet and thin stainless steel plate and phosphor bronze plate. It has quick-drying and good lubricity and other features.
◆ FC-FJ6塑性加工油适用于薄钢板、薄铜合金板、薄铝合金板的冲压、冲孔、挠曲、轻度拉深工艺。产品具有速干性，不易挥发成分少，不用清洗等特点。
FC-FJ6 plastic processing oil is suitable for stamping, punching, bending and mild drawing process of thin steel sheet and thin copper alloy sheet and thin aluminum alloy plate. It has quick-drying, the less volatile components, without cleaning, etc.
◆ FC-FJ7M塑性加工油适用于薄钢板、薄不锈钢板的冲压、冲孔、挠曲、轻度拉深工艺。产品具有速干性，不易挥发成分少等特点。
FC-FJ7M plastic processing oil is suitable for stamping, punching, bending and mild drawing process of thin steel sheet and thin stainless steel plate. It has quick-drying and the less volatile components, etc.
◆ FC-FJ15Q塑性加工油适用于薄钢板的冲压、冲孔、挤压、轻度拉深工艺。产品具有优良的干燥性，良好的润滑性等特点。
FC-FJ15Q plastic processing oil is suitable for stamping, punching, extrusion and mild drawing process of thin steel plate. It has excellent drying properties and good lubricity, etc.
◆ FC-FJ10塑性加工油适用于薄钢板、薄不锈钢板的冲压、冲孔、挠曲、轻度拉深工艺。产品具有速干性，不易挥发成分少等特点。
FC-FJ10 plastic processing oil is suitable for plastic processing oil is suitable for stamping, punching, bending and mild drawing process of thin steel sheet and thin stainless steel plate. It has quick-drying and the less volatile components, etc.
◆ FC-SF6020K适用于碳素钢、低合金钢的冲压、冲孔、拉伸工艺，也可用于螺钉、螺帽等的冷压锻造。该产品不含有氯系极压剂，无不愉快气味，易被操作工接受。
FC-SF6020K is applicable to stamping, punching and drawing process of the carbon steel and low alloy steel, can also be used for screws, nuts and other cold forging. This product does not contain chlorine extreme pressure agent, has not unpleasant odor and easy to be accepted by operators.
◆ FC-SF6000适用于合金钢、不锈钢的冷锻、冲压工艺，也可用于螺钉、螺帽等的冷压锻造。该产品不含有氯系极压剂，无不愉快气味，易被操作工接受。
FC-SF6000 is applied to cold forging and stamping process of alloy steel and stainless steel, can also be used for screws, nuts and other cold forging. This product does not contain chlorine extreme pressure agent, has not unpleasant odor and easy to be accepted by operators.
◆ FC-SM220塑性加工油适用于钢、铝材的拉深、冲压、弯曲工艺。产品含有硫系极压剂，具有优良的润滑性，粘度低，适用性强。
FC-SM220 plastic processing oil is suitable for drawing, stamping and bending process of steel and aluminum. It contains sulfur extreme pressure agent, has excellent lubricity, low viscosity and strong applicability.
◆ FC-FJ8塑性加工油适用于薄钢板、薄铜合金板、薄铝合金板的冲压、冲孔、挠曲、轻度拉深工艺。产品具有速干性，不易挥发成分非常少，不用清洗等特点。
FC-FJ8 plastic processing oil is suitable for stamping, punching, bending and mild drawing process of thin steel sheet, thin copper alloy plate and thin aluminum alloy plate. It has quick-drying, the less volatile components, without cleaning etc.
◆ FC-SF6000D适用于合金钢、不锈钢的冷锻、冲压工艺，也可用于螺钉、螺帽等的冷压锻造。该产品不含有氯系极压剂，无不愉快气味，易被操作工接受,CF6000D是CF6000的低粘度品。
FC-SF6000D is applied to cold forging and stamping process of alloy steel and stainless steel, can also be used for screws, nuts and other cold forging. This product does not contain chlorine extreme pressure agent, has not unpleasant odor and easy to be accepted by operators, CF6000D is a low viscosity product of CF6000.
◆ FC-SD1700适用于碳素钢的深绞孔加工工艺，可冲孔厚达3-6mm的钢板。该产品不含有氯系极压剂，无不愉快气味，易被操作工接受。
FC-SD1700 is applicable to deep reaming process of the carbon steel, can punch to 3-6mm thick steel plate. This product does not contain chlorine extreme pressure agent, has not unpleasant odor and easy to be accepted by operators.
◆ FC-FJ20塑性加工油适用于非铁金属冲压、冲孔、挠曲、轻度拉深工艺。
FC-FJ20 plastic processing oil is suitable for stamping, punching, bending and mild drawing process of non-ferrous metals.
◆ FC-SF100塑性加工油适用于铜合金、铝合金的冲压、弯曲、拉深、锻造工艺，也使用于碳素钢、低合金钢的挤压加工等。
FC-SF100 plastic processing oil is suitable for stamping, bending, deep drawing and forging process of copper alloy, aluminum alloy, also used in extrusion processing of carbon steel and low alloy steel, and so on.
◆ FC-DC91W适用于不锈钢成型加工，含有大量的油性剂和特殊添加剂，具有优良的润滑性和冷却性。该产品不含有氯，无不愉快气味，易被操作工接受。
FC-DC91W is applicable to forming process of stainless steel, contains a lot of oily agent and special additive, it has excellent lubrication and cooling. This product does not contain chlorine, has not unpleasant odor and easy to be accepted by operators.
◆ FC-SF3300CH适用于小型螺钉、螺帽等的冷间锻造加工。该产品含有硫、磷系极压剂，润滑性优良，无不愉快气味，易被操作工接受。
FC-SF3300CH is suitable for cold forging process of small screws and nuts. This product contains sulfur and phosphorus based extreme pressure agent, has excellent lubricity, has not unpleasant odor and easy to be accepted by operators.
◆ FC-FJ30CH塑性加工油适用于非铁金属冲压、冲孔、挠曲、轻度拉深工艺。
FC-FJ30CH plastic processing oil is suitable for stamping, punching, bending and mild drawing process of non-ferrous metals.
◆ FC-RC-1非水溶性轧制油适用于曲轴辊的辊面成型加工工艺。
FC-RC-1 non-water-soluble rolling oil is suitable for forming process of Crankshaft roller surface.
◆ FC-FJ71塑性加工油适用于烧结部品的矫正、矫形。
FC-FJ71 plastic processing oil is suitable for correction and orthopedic of sintering parts.
◆ FC-SF51塑性加工油适用于非铁金属冲压、冲孔、挠曲、拉伸工艺。
FC-SF51 plastic processing oil is suitable for stamping, punching, bending and stretching process of non-ferrous metals.
◆ FC-SE205D塑性加工油适用于不锈钢、炭素钢、合金钢的精密冲裁、拉深、拉延等加工。产品含有较多的极压剂，润滑性良好。
FC-SE205D plastic processing oil is suitable for precision punching and drawing process of stainless steel, carbon steel and alloy steel. The product contains more extreme pressure agent, has good lubrication.
◆ FC-FJ110为不含氯的塑性加工油，该产品适用于钢管的矫正加工，也适用于钢、铸铁的室内短期工序间防锈工艺，能在工件表面形成均匀、透明的软质防锈膜，从而有效地防止锈蚀发生，同时FJ110塑性加工油还具有优良的工序间清洗作用。
FC-FJ110 is plastic processing oil without containing chlorine, the product is suitable for correct processing of steel, also applicable to anti rust technology of steel and cast between indoor short-term operation, can form uniform and transparent soft film on the surface of work piece, so as to effectively prevent rust, FJ110 plastic processing oil also has excellent inter-process cleaning action..
◆ FC-SF6120塑性加工油适用于碳素钢、不锈钢的重度冲压、拉伸工艺。该产品具有优异的润滑性，适用性很强。
FC-SF6120 plastic processing oil is suitable for heavy stamping and drawing process of carbon steel and stainless steel. The product has excellent lubricity and strong applicability.
◆ FC-SH7800塑性加工油适用于碳素钢、铝合金的深冲孔，碳素钢的冲压加工。该产品具有优良的润滑性，适用性强。
FC-SH7800 plastic processing oil is suitable for deep punching of carbon steel and aluminum alloy, stamping process of carbon steel. The product has excellent lubricity and strong applicability.
◆ FC-FJ75塑性加工油是一款以油性剂为主的塑性加工油剂, 润滑性能优异，且不含氯、硫、磷系等极压剂。适用于铁系烧结材料的精压加工，以及钢及其他非铁金属的冲压加工。
FC-FJ75 plastic processing oil is plastic processing oil based on oily agent, it has excellent lubricating performance, and does not contain chlorine, sulfur, phosphorus and other extreme pressure agent. Applicable to the coining process of iron-based sintered material and stamping process of steel and other non-ferrous metals.